The New Spring II Loom

Write a review
| Ask a question

$8,990.00 CAD

Louet items are special order items. Please contact me for delivery timelines. I promise, Louet is worth the wait!

Spring is a countermarche loom available in 90 cm (35 3/8") and 110 cm (43 1/4") weaving width.   The loom can be ordered with eight or twelve harnesses.   The warp beam is held by a friction brake, enabling you to advance the fabric sitting at your loom.   The beater is adjustable in height. the Spring is made of lacquered beech and the design of the loom includes a built-in raddle on top of the castle and a storage shelf as well as the following included items:

  • a stainless steel reed 40-10 (metric)

  • 800/1200 Texsolv heddles (392 mm)

  • tie-up and lease sticks

  • sixteen warp sticks.

Louet Continues to innovate and improve our products.   The Spring and Delta looms have long had a challenge when trying to change heddles (add or remove).   The new click lock system allows a user to easily add and remove heddles.   These are standard on all Spring and Delta looms.   We also offer a conversion kit for older Spring looms.

Dimensios (wxdxh):

  • Spring 90 - 125 x 94 x 116 cm (48" x 37" x 45 1/2")

  • Spring 110 - 145 x 94 x 116 cm (55" x 37" x 45 1/2")

Weight: 

  • Spring 90 - 70 kg (150 lb)

  • Spring 110 - 80 kg (165 lb)

  • add 5.5 kg (12 lb) for an extension set.

Available Accessories for purchase separately:

  • Extension set of four harnesses and four treadles

  • Bench - height 57 cm (22 3/8")

  • Second warp beam with back beam (seperate for Spring I and Spring II)

  • Sectional warp beam (seperate for Spring I and Spring II)

  • Flying Dutchman shuttle

  • Fly shuttle device (seperate for Spring I and Spring II)

Spring II Improvements

The Spring II was launched in Dec 2020.   The following improvements were made to the original Spring 

Louët is always innovating, dedicated to bringing you the most comfortable, enjoyable weaving experience. We have updated one of our most popular looms.

The new Spring II has the following improvements:

The new Spring II makes the weaving action even more ergonomic and comfortable:

• You can advance more fabric in one movement of the handle, due to a new magnet.

• The brake disc of the warp beam acts as a crank, with a handle that turns in the disk.

• The shafts move more easily, as rollers with ball bearings have replaced the nylon rollers.

• The beater movement has a larger radius and improved arc due to longer uprights and a lowered hinge point.


• Clamps that aid in warping the loom, as well as warping instructions, are now included. 

The new Spring II has features that makes your loom easier to use and customize:

• The shaft bars can be easily clicked in and out of hooks that remain fastened to the cords, allowing you to easily add or remove heddles. This design also prevents you from inadvertently reattaching the shaft bars to the cords in the incorrect place. The shaft bars are also easier to reach due to smaller middle posts and modified main upright shaping.

• The warp beam now has room for 4 sectional warp rails (compared to 3), which are also easier to attach if you expand your loom.

• The shafts have more space for extra heddles.

• It is easier to take the beater on and off the loom, as the hinge hooks of the beater are mounted on the loom.

• Attaching the top beater rail is easier, due to screw knobs.

• Inserting warp yarns into the raddle is easier and the yarns will not come out while beaming the warp onto the warp beam, due to the addition of two wooden strips that can slide over (and cover) the raddle.

• It is easier to hook on and attach the tie-up cords, due to more space between the upper lams and the lower shaft bar as well as smaller screw heads on the treadles.

• The cords of the warp tension device can no longer run off the rollers as they now pass through two eyelets.

• Securing the back beam section is easier. And when folded, there are no loose parts to remove or potentially lose.

The new Spring II has improved construction and aesthetics, allowing easier assembly:

• Overall sturdier frame with new front posts and thicker main uprights and foot rail.

• The warp beam and cloth beam are now made of wood and are a larger diameter, the redesign in this section now allows for easier assembly.

• Heavier ratchet wheel and ratchet, ideal for weaving carpets.

• Easier to place the new countersunk holes onto the floating breast beam arms.

• A more attractive look on the hinged connection of the floating breast beam arms to the front posts, due to a less visible connecting bolt.

• Loom is now packaged in a more compact way,cleverly designed to expand and assemble. All boxes ship with courier, so no freight transport is needed. All shafts and cords continue to be pre- strung.

    I've personally owned and woven on the Jane, Erica, Megado and Lisa. I've also taken spinning lessons with the drop spindles and spinning wheels. They're amazing! 

    Size and Accessories

    Get the latest updates

    Monthly giveaway! Newsletter subscribers are entered into a monthly draw. Each month will feature a different brand of yarn. The winner chooses the colour they want & it's shipped for free (within North America)